Windows 11, macOS Monterey, Apple M1, M1 Max, M2 and M2 Max Compatibility
iCON Device COMPATIBILITY UPDATE
Apple M1 and MacOS 11 Big Sur and MacOS 12 Monterey: Most current iCON hardware and software is now fully compatible with the macOS 12 Monterey Operating System and the M1 chip. Generation One versions of the QCon Pro and QCon EX are also compatible with Monterey and the M1 with an update to firmware version 1.25. Some legacy devices are not compatible with Big Sur or Monterey such as the Platform U22 and Ultra4 audio interfaces. Please check your device’s product page for updated OS compatibility information.
Windows 11: Most current iCON hardware and software is fully compatible with Windows 11. Legacy audio interfaces Pro Drive III and later are compatible with Windows 11. Older audio interfaces including the UMix 1008 Satellite are not compatible with Windows 11. Please check your device’s product page for updated OS compatibility information.
QCon Pro X, QCon Pro XS, QCon Pro G2, QCon EX G2, Platform M+, Platform X+, Platform Nano and Platform Nano Air offer Limited Compatibility with AMD, Apple M1 and M2 Processors: Updating to our latest firmware versions can bring your legacy iCON controller into full compatibility with AMD, M1 Max, M1 Pro, M1 Ultra, M2, M2 Max and M2 Pro processors, however, OUR FIRMWARE UPGRADE DEVICE IS NOT COMPATIBLE WITH AMD, M1 MAX OR M1 PRO. Please download the latest iMAP and update your iCON device to the latest firmware on an M1 or an Intel computer. Again, your iCON device will work on an AMD, Apple M1 Max or M1 Pro computer, but you will need to upgrade to the latest firmware on an Intel or M1 computer BEFORE you switch to the new computer.
iCON audio interfaces (hardware versions Pro-Drive III and later), ProDriver 4 and the firmware upgrade tool are fully compatible with AMD, and Apple Silicon processors.
Thank you very much.
Your iCON Team
Comments
0 comments
Article is closed for comments.