iCON Support Admin
- Total activity 57
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 0
- Subscriptions 44
Activity overview
Latest activity by iCON Support Admin-
iCON Support Admin created an article,
FAQ: What is the correct startup sequence for my iCON controller?
(This article applies to the V1-M, V1-X, P1-M, P1-X and the P1-Nano) iCON’s new series of controllers are unlike any other general midi controllers that you may have configured with your DAW be...
-
iCON Support Admin created an article,
FAQ: How do I access basic settings and perform various self tests on my iCON V1-M and V1-X Controllers?
Basic settings and various self-tests can be accessed via your V1-M/X controller. They are as follows; Fader Calibration LCD Backlight LED and LCD Character Test System Select LCD Test Aging Test ...
-
iCON Support Admin created an article,
FAQ: How do I assign the master fader to a MIDI function (V1-M/P1-M)?
Please turn on your controller, iMAP and then DAW in that order (CiD). Click the 'Master/Assign' button on your controller so that the pink LED is lit. This signifies that the 'Assign' mode is acti...
-
iCON Support Admin created an article,
FAQ: How do I perform automation functions in Pro Tools from my DAW Controller?
(This article applies to the V1-M, P1-M, Qcon Pro G2, Qcon Pro X and Platform M+ and the Qcon Pro) Pro Tools uses the HUI protocol to communicate with the controllers. Some buttons behave in a sl...
-
iCON Support Admin created an article,
FAQ: How do I troubleshoot V Series and P Series DAW controllers in Cubase?
This article is applicable to the V1-M and V1-X, the P1-M and P1-X, and the P1-Nano. Firstly, please remember the order in which the different elements should be launched; Controller iMAP DAW (CID)...
-
iCON Support Admin created an article,
FAQ: How do I disable the motorized fader on the P1-Nano?
Occasionally, users may choose to disable the motorized fader on the P1-Nano. Disabling the fader is possible by turning off the unit, then pressing and holding the 7th encoderwhile turning the un...
-
iCON Support Admin created an article,
FAQ: How do I remove a function button from my DAW Controller Touchscreen and iMap?
To remove a function button from the Controller’s touch screen and iMap; Click on the Button Functions tab in the iMap software Click on the button you want to remove (it will be highlighted in ...
-
iCON Support Admin created an article,
FAQ: Why isn’t my iCON DAW Controller meter bridge working with Pro Tools?
This article applies to the V1-M, V1-X, P1-Nano, P1-M and P1-X DAW Controllers and D4, D4T and D5 displays. ICON Controllers use the HUI Protocol to communicate with Pro Tools, (not EUCON). You sh...
-
iCON Support Admin created an article,
FAQ: How to Set Extender Positions on V1-X and P1-X DAW Control Extenders
The following applies to both P1-X and V1-X extenders. V1-X extenders are used in the following picture examples, although the principles outlined apply to both V and P series DAW Controllers, (wit...
-
iCON Support Admin created an article,
FAQ: V1-M +V1-X’s - I have 7 expansion units – are there any restrictions on the maximum amount of extenders?
As you will know, how you add extenders is described in the article ‘FAQ: How to Allocate Extender Positions’ in the Help Center and in the V1-X extender manual, (‘Allocating Extender Positions’). ...