Follow

QCON SERIES: Jittering Faders on Qcon Pro EX G2 when banking. 

Issue: Jittering Faders on Qcon Pro EX G2 when banking. 

If your faders experience jitter (random instability or periodic shaking) on the QCon Pro EX G2 when banking then this procedure should help you. 

 Resolution:  Calibrate the Faders on the Qcon EX G2 Extenders up to a value of 165 for each channel and it should fix the issue. Same procedure as shown in the Qcon Pro X PDF:
https://s3.amazonaws.com/assets.icon-global.com/wp-content/uploads/2016/02/Qcon-proX-Fader-Calibration-procedures1.pdf

Please see an example of the issue explained in our community here: https://support.iconproaudio.com/hc/en-us/community/posts/360028762331-QCon-Pro-G2

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

  • Avatar
    Daniel Perez

    I would like to know why the leds of the level are faster than the audio track do not go at the same speed, then they remain fixed in red

  • Avatar
    Volkan Meydan

    What is the difference between Icon QCon EX G2 and Icon QCon EX G2 B-Stock? thanks.